To fix a loose Ethernet cable, first, locate the cable that is loose. This cable will have pins sticking out of the end of it. Once you have located this cable, you can follow these easy steps to fix it:
1) Unplug your laptop from the power source and remove any cords from the back of it.
2) Remove the screws on either side of the port where the loose cable is plugged in.
3) Gently pull up on the tiny metal cover protecting the pins so that you can see them.
4) Push down on each pin until they are all holding tightly to their connectors.
5) Put the tiny metal cover back on and screw everything back together! You’re now ready to enjoy your fast-wired internet connection again!
What is a loose Ethernet cable?
A loose Ethernet cable is the type of cable that is used to connect your laptop to the internet through a wired connection. This cable will have pins sticking out of the end of it.
The benefits of fixing a loose Ethernet cable
If you want your laptop to run at its full speed, it is very important to fix a loose Ethernet cable. A loose cable can make your laptop run slower and affect the quality of the internet; however, with the simple steps mentioned above, you will be able to quickly fix this problem with just a few minutes of work. With that said, fixing a loose Ethernet cable is beneficial because it will allow you to use your laptop at its full potential.
Conclusion
It’s not always easy to find the right Ethernet cable for your laptop. But when you do find it, you’ll be glad you made the effort. There are a few things to consider, but it’s easier than you might think.
