How To Create A Mesh Network With Two Routers?

In today’s modern age of technology, it has become imperative to achieve uninterrupted and fast internet connectivity. However, Wi-Fi signals can weaken as they pass through walls and floors, resulting in poor signal strength. This causes network connection issues and slows down internet speeds. One solution to this is the establishment of a Mesh network. A Mesh network comprises several satellite nodes that help extend Wi-Fi coverage throughout a building, ensuring stable and fast connections. In this article, we’ll discuss how to create a Mesh network with two routers, which is a cost-effective and straightforward way to expand your Wi-Fi coverage.

Mesh networks have become increasingly popular due to their ability to extend Wi-Fi coverage in buildings with multiple floors and rooms. However, not everyone can afford to purchase expensive Mesh network devices. Fortunately, you can set up a Mesh network using your existing routers. Two routers can be easily connected to extend Wi-Fi coverage. The primary router serves as a gateway while the secondary router functions as a repeater node, extending Wi-Fi coverage. The process is relatively simple, and with a few easy steps, you can ensure that you have an uninterrupted and stable Wi-Fi connection in every room in your building.

How to Create a Mesh Network with Two Routers?

A mesh network is a type of network that allows multiple devices to communicate with each other and share resources. It consists of a decentralized topology where each device acts as a node that can relay data to other devices within the network. Mesh networks are useful in scenarios where traditional Wi-Fi networks are not sufficient, such as large homes or buildings with thick walls.

To create a mesh network with two routers, follow these steps:

1. Choose the primary router: Select the router that will act as the primary router, which will provide an internet connection to the other devices in the network. This router should have the strongest signal and the most advanced features.

2. Configure the primary router: Configure the primary router according to the manufacturer’s instructions. This will typically involve setting up a username and password, enabling DHCP, and configuring the wireless settings.

3. Choose the secondary router: Select the router that will act as the secondary router, which will extend the coverage area of the network. Ideally, this router should be one that is compatible with the primary router and has the same security features.

4. Configure the secondary router: Configure the secondary router according to the manufacturer’s instructions. This will typically involve configuring the wireless settings and enabling bridge mode.

5. Connect the routers: Connect the primary router to the internet source (such as a modem) and connect the secondary router to the primary router using an Ethernet cable. Make sure that the secondary router is set to bridge mode so that it can act as a relay for the primary router.

6. Configure the network: Once both routers are connected and configured, access the primary router’s configuration page and set up the mesh network. This may involve configuring mesh settings, adding the secondary router as a node, and assigning IP addresses to all devices on the network.

7. Test the network: Once the mesh network is set up, test it by connecting to the network from different locations within the coverage area. Make sure that all devices can connect to the network and that the signal strength is strong enough to support the desired use case.

By following these steps, it is possible to create a robust mesh network with two routers that can provide reliable coverage in a large area.


1. What is a mesh network and how does it work with two routers?
A mesh network is a network topology that uses multiple interconnected routers to create a single, seamless network. With two routers, one can act as the main router, while the other acts as a node to extend the network coverage.

2. What type of routers do I need to create a mesh network?
To create a mesh network, you need two routers that support the same mesh networking protocol, such as Google Wifi, Orbi, or Eero. These routers typically have dedicated mesh networking hardware and software that allows them to communicate with each other.

3. How do I set up a mesh network with two routers?
To set up a mesh network with two routers, you need to connect one of the routers to your modem and set it up as the primary router. Then, you can connect the second router to the primary router and configure it as a mesh node. Once connected, the routers will work together to provide seamless network coverage.

4. What are the benefits of using a mesh network with two routers?
One of the main benefits of using a mesh network with two routers is that you can extend your network coverage without sacrificing performance. Mesh networks also typically provide better coverage compared to traditional routers, making them ideal for large homes or areas with multiple floors.

5. Can I add additional mesh nodes to my network in the future?
Yes, you can add additional mesh nodes to your network in the future to further extend your network coverage. Simply connect the additional node to your existing network and configure it to work as part of your mesh network.


In summary, creating a mesh network with two routers is simpler than you might have initially thought. By following the steps outlined above, you can seamlessly connect multiple devices and extend the range of your wireless signal throughout your home. With this setup, you can enjoy a stable and reliable internet connection without having to worry about dead zones or connection drops. Don’t hesitate to give it a try and experience the benefits of having a mesh network.

Leave a Reply